Fall Protection

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

• Anchorage: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 lbs. with certification of a qualified person or 5000 lbs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure.
• Plan your personal fall protection system. Before installing and using this equipment, consider all factors affecting your safety during use of this equipment.
• Warnings and instructions must be read and understood before using equipment.
• Equipment must be used by trained personnel only.
• Users must understand all OSHA regulations, ANSI standards, and other relevant regulations and standards pertaining to fall protection equipment.

• Small rebar hooks on both ends
• Shock absorbing pack

Full body harness, positioning type D-ring center back and on each hip.

Large Carabiner, 3600 lb Gate, 2-1/4In Throat

Chain Rebar Assembly, 22In with Large Swivel Rebar Hook

3M™ Protecta® Vest-Style Positioning Harness with a fixed D-ring to minimize workday readjustment and a modern design that gives the harness a fresh, sleek look. Plus, Tongue-Buckle Leg Connection, Pass-Through Chest Connection, and Back and Side D-rings. Designed for added convenience, these updated harnesses are rated for 420 lbs (190 kg) total working weight.

Captures Squids to secure a safe connection to tools, and doesn’t require heat to adhere the tape. Provides security and extra grip by quickly wrapping on a variety of hand tools, power tools, and other equipment.

D-Ring To Hook Extender, 18”

LifeLine Rope, Poly Blend, 5/8” x 50’