Search Results

Features

• Tight tolerances for snug fit on fastener.
• Used wherever powered drive tools are used to install or remove fasteners.
• Designed to withstand the high torque and force associated with impact tools in repetitive application.
• Features two through holes and a groove to accept a Proto Retaining Ring or pin and O-ring to help secure the socket to the drive tool anvil.
• Position at appropriate angle to turn fasteners where obstructions prevent a straight application.
• Ball and spring design which allows for a 30° working angle.
• Smooth 360° rotation.

Features

• Robust 24-tooth gear/floating pawl design provides 15° ratcheting angle while maximizing ultimate torque.
• Thin head design for access into tight work areas.
• Reversing level designed for quick, one-hand operation.

3/4DR IMP EXTENSION 5IN

Features

• Head Flexes 90° from horizontal.
• Made of heat-treated alloy steel.
• Chrome plated finish.

3/4DR IMP EXTENSION 7IN

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.

3/4INDR X 8IN EXTENSION

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.

3/4DR IMP EXTENSION 10IN

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.