Air Compressors

The 6590HK18, which was engineered as an upgrade to the 4090HK17, delivers up to 50% more CFM by comparison. Delivering 13.8 CFM @ 90 PSI, this unit incorporates a 196 cc (GX200) Honda engine with automatic idle-down, for increased fuel efficiency, and an atmospheric unloading system to prevent oil consumption.

About the Pump
Heavy-Duty, Single Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Cast-Iron Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 11” Flywheel, Oil Sight Gauge

About the Engine
196 cc (6.5 HP) Honda 4 Cycle, Complete Die Cast Aluminum Alloy with Cast-Iron Sleeve, Overheard Valves, Retractable Starter, On/Off Switch, Splash Lubricated, Low Oil Shutdown

5.5HP 9GAL WHEELBRW HONDA COMPRESSOR 9.3CFM

Model FC250090L features wheels and a handle with an integrated manifold, making this 24-gallon air compressor much more portable and user-friendly than any of its predecessors. It’s perfect for the garage or small workshop. The 2 HP motor/pump produces 5.1 CFM @ 90 PSI and is equipped with manual overload protection and ball bearings for longer life and greater durability.

Notes

ABOUT THE PUMP
ROLAIR Quality, Single Stage, Ball Bearings, Cast-Iron Cylinder, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2 HP, 3400 RPM, S-1 Rated for Continuous Duty, Low Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
100% Duty-Cycle Motor
Start/Stop Pressure Switch
Air Line Regulator
Tank Pressure Gauge
Easy-to-Maneuver 24 Gallon Tank
Wheels and Handle
Safety Relief Valve
Intake Filter/Silencer
Initial 12 oz. Oil Fill Included

7.5HP 80GAL 2 STAGE ELEC COMPRESSOR W/STARTER 24.8 CFM

Model VT20ST is the go-to hand carry air compressor for contractors who want a relatively quiet model capable of running all day. The low speed, continuous-duty motor-pump delivers 4.2 CFM @ 90 PSI. The VT20ST features integrated twin tanks for extra air capacity.

Notes

ABOUT THE PUMP
Low Speed ~ Quiet, ROLAIR Quality, Cast-Iron Cylinder, Single Stage, Ball Bearings, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2 HP, 1700 RPM, S1-Rated for Continuous Duty, Low-Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
100% Duty-Cycle Motor
Reduced Operating Noise Due to Low-Speed
Start/Stop Pressure Switch with On/Off Lever
Safety Relief Valve
Intake Filter Silencer
12.3 Amp Motor
Initial 10 oz. Oil Fill Included

Pressure Gauge, 0-300 in 5 lb. Graduations, Automatic Pilot Valve Operation, Industrial Flexible Discharge Hose, Automatic Idle Control for Economy and Long Service Life, Intake Filter w/Silencer & Replaceable Element, Schmidt Belt Tightening Device, Air-Cooled Aftercooler, Totally Enclosed Steel Belt Guard, Safety Relief Valve

THIS PORTABLE, LIGHTWEIGHT PANCAKE COMPRESSOR HAS A AN OIL-FREE, MAINTENANCE-FREE PUMP THAT DELIVERS 2.6 SCFM* 90PSI AND A MAXIUMUM TANK STORAGE PRESSURE OF 150 PSI. THE 78.5 DBA** RATING IS IDEAL FOR A QUIET WORK ENVIRONMENT.</p><h2>Features</h2><ul><li>Long-life oil-free, maintenance-free pump for convenient use</li><li>150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered 90 PSI pump enable long tool run time with quick recovery

Our 150 psi 6-Gallon Oil-Free Pancake Compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high-pressure design optimizes air tool performance, delivering 2.6 SCFM at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap.

Features

150 psi max tank pressure stores more air in the tank for longer tool runtimes2.6 SCFM @ 90 psi allows for quick compressor recovery time, per ISO12176 gal Pancake style tank for stability, includes water drain valve and rubber feetLow Amp 120V motor starts easily in cold weather or with extension cordDurable oil-free pump for long life and no maintenanceShroud, handle and console cover protects vital components, makes unit easier to carry and includes cord wrapTwo regulated, factory installed air couplers to easily support two usersOnly 30 lbs for easy portability

5 HP single and two-stage light industrial stationary electric air compressors. Model V5160PT03X shown. Click to view all models in this category.
Optional Equipment: (No optional equipment available for V5160PT03X) Automatic Tank Drain, Low Oil Shut Down, Vibration Pads, Dual Controls, Head Unloader, Refrigerant Air Dryer.

Notes

ABOUT THE PUMP
Single or Two Stage, Cast-Iron Cylinders, Aluminum Head and Crankcase for Faster Heat Dissipation, Ball Bearings, Splash Lubricated, Bearing Inserts on Connecting Rods, Swedish Lamellar Reed Valves, Oil Sight Gauge, Low RPMs to Ensure Long Life and Trouble-Free Performance.
ABOUT THE MOTOR
3450 RPM, 60 Hz, Single Phase 230 Volt, Open Drip-Proof Motor.
STANDARD EQUIPMENT
Pressure Switch – Start/Stop Operation,145-175 PSI Settings, On/Off Switch
Automatic Unloading Device for Loadless Starts
Heavy-Duty Brass Shut-Off Valve
Pressure Gauge, 0-300 PSI in 5 lb. Graduations
Safety Relief Valve – ASME Approved
Multiple V-Belt Drive
Intake Filter/Silencer with Replaceable Element
Totally Enclosed Steel Belt Guard

9HP 30GAL TRUCK MOUNT HONDA COMPRESSOR 17CFM

The ROLAIR® 9-Horsepower Two-Stage Two-Cylinder Portable Gas Compressor delivers enough pneumatic pressure for all your industrial power tools. This device expels air at 20.1 cubic feet per minute (CFM) at 90 pounds per square inch (PSI). It uses gasoline for power so it can pressurize air without any significant delay before you get started on the job. This Rolair air compressor comes with two cast-iron cylinders that withstand high pressure levels and wheels to support the unit’s 286-pound weight. It shuts off automatically when oil levels fall too low and protects itself from extensive fuel usage with a built-in idle system. The 9-horsepower air compressor relies on a Honda engine for its speed and efficiency, and it has a retractable starter that protects against accidental engagement.

Features

• Rolair twin-tank compressor includes Honda engine, durable wheels and belt adjustment device
• Delivers 20.1 CFM at 90 PSI
• Gasoline air compressor pressurizes air quickly
• Cast-iron cylinders withstand high pressure levels
• Rolair air compressor uses wheels to support 286-pound body
• Automatic shutoff protects against friction and grinding
• 9-horsepower air compressor’s iIdle system saves fuel between tasks
• Retractable starter prevents accidental engagement
• 12-month manufacturer’s warranty from date of purchase or 18 months from date of production; Made in the USA

The super-quiet and portable design of the AB5 is ideal for light trim/finish carpenters, DIY enthusiasts and hobbyists alike. Tucked safely inside the protective roll-cage, this compressor’s motor-pump will deliver plenty of air while drawing a maximum of 1.2 amps. The manifold with built-in regulator, gauges and quick-disconnect will make operation easy and convenient.

Notes

ABOUT THE PUMP
Super Quiet, ROLAIR Quality, Single Stage, Oil-less, One Cylinder, Ball Bearings, Cast-Aluminum Cylinder, Stainless-Steel Reed Valve, Low Amp Draw – 1.2 Amps
ABOUT THE MOTOR
.5 HP, 1440 RPM, Low Amp Draw, Manual Overload Protection, 240 Volt, 50 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability
STANDARD EQUIPMENT
1/4” Nitto Style One-Touch Fitting
Cord Wrap
Ball Valve Drain
Compact and Rugged Roll Cage
Low Profile Design
1.2 Amp Motor
Anti-Vibration Rubber Feet