Ladders and Work Access

DOUBLE STEP LADDER, F/G, 16’, 300#

F/G Double Step Ladder, 300LB, 8’

The PD6210 Podium Ladder offers the same reach height as a 12ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360® gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.

Features

• Same reach height as a 12ft Stepladder
• 4X Work Zone to reach all directions
• Extra-large platform for long standing comfort
• LOCKTOP™ extended guardrail securely wraps around work zone and holds an arsenal of tools
• EDGE360® includes an integrated rail shield, EDGE bracing and oversized foot pads
• 300lb Load Capacity, Type IA Duty Rating
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Full set of rear horizontals spaced one per foot
• All steps and two rear horizontals are knee-braced

The L6206 Fiberglass 6ft Leaning Ladder is ideal for the professional. With a duty rating of 300lb, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close.

Features

• LEANSAFE® Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Color and branding differentiates LEANSAFE® from standard stepladders
• Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates or washers to protect rails
• 6 ft LEANSAFE® leaning ladder in step ladder mode has a maximum standing height of 3 ft 10 in and a maximum reach height of 10 ft
• 6 ft LEANSAFE® leaning ladder in leaning mode has a maximum standing height of 2 ft 10 in and a maximum reach height of 9 ft

The L6210 Fiberglass 10ft Leaning Ladder is ideal for the professional. With a duty rating of 300lb, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close.

Features

• LEANSAFE® Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Color and branding differentiates LEANSAFE® from standard stepladders
• Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates or washers to protect rails
• 10 ft LEANSAFE® leaning ladder in step ladder mode has a maximum standing height of 7 ft 8 in and a maximum reach height of 14 ft
• 10 ft LEANSAFE® leaning ladder in leaning mode has a maximum standing height of 6 ft 8 in and a maximum reach height of 13 ft

F/G Double Step Ladder, 300LB, 10’

The PD6204 Podium Ladder offers the same reach height as a 6ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360® gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.

Features

• Same reach height as a 6ft Stepladder
• 4X Work Zone to reach all directions
• Extra-large platform for long standing comfort
• LOCKTOP™ extended guardrail securely wraps around work zone and holds an arsenal of tools
• EDGE360® includes an integrated rail shield, EDGE bracing and oversized foot pads
• 300lb Load Capacity, Type IA Duty Rating
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Full set of rear horizontals spaced one per foot
• All steps and two rear horizontals are knee-braced

F/G Double Step Ladder, 300LB, 12’

The 7108-1 One-Section Round Rung 8-foot Straight Ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 pounds making them durable and long-lasting. The slip-resistant, Traction-Tred® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted to the side rails at four points.

Features

• Exclusive Alflo® rung joint means Twist-Proof® performance
• 1.75-inch slip-resistant Traction-Tred® round rungs
• Plate and rung assembly are riveted at four points to each side rail to allow for rung replacement
• Rugged, heavy duty extruded rung locks are spring loaded to operate smoothly
• Pre-pierced holes for easy field installation of accessories
• Durable rail shield and shoe bracket protects rail from damage
• Dual action feet with slip-resistant pad and spur plate for use on hard or penetrable surfaces
• Mar-resistant molded end caps
• Ideal for utility and telecommunication industries
• Shoe with slip-resistant pad and spur plate

F/G Extension Ladder, 300LB, 36’