Fall Protection

US-5000C Rope Grabs are made of durable non-corrosive stainless steel, brass & bronze.They 100% inspected for function, construction and material integrity and are designed to meet the performance requirements of ANSI Z359.1, OSHA 1926 (maximum 3 ft (0.9m) shock absorbing lanyard) and CSA Z259.2 (a permanently attached 3 ft (0.6m) lanyard) when used with Polysteel / Poly Pro Blend or be positioned not to exceed 6’ free fall. 5/8? (16mm) Rope and installed and maintained properly.

NOTE:This Rope Grab is intended to be used as part of a complete personal fall protection system. All other components subs stems and connectors used in conjunction or attached to this Rope Grab should be compatible and meet the appropriate OSHA /ANSI /CSA requirements for the intended application. Substandard or non-approved components could compromise the reliability of the system and jeopardize safety of the user.

CROSS ARM STRAP 12’

Full body harness, positioning type D-ring center back and on each hip with tongue.

Full body harness with D-ring center back only.

Positioning Lanyard, 1” Web X 6’ 2 Snaphooks

I-Beam Sliding Anchor, 3.5” – 14”

The model# US-5000 is a rope grabbing device that follows a worker’s movement up and down a vertical lifeline. If a fall occurs, the rope grab locks on the rope and absorbs much of the force generated during the free fall. The unique energy absorbing design of the US-5000 allows the user to Use a standard rope or web lanyard and still meet OSHA’s maximum force requirements.

Model # US-5000 is to be used with 5/8? or 3/4? diameter 3- strand synthetic rope lifeline with minimum tensile strength of 5800 Ib. Polyester type is preferred.

The Squids® 3400 Glove Clip Holder with Dual Clips keeps your face masks, gloves, ice traction, cooling towels, keys and whatever else always seems to mysteriously disappear close at hand. The versatile dual clip version can be used as one unit or detached and used as two separate pieces. The patented design has a breakaway feature that allows the glove grabbers to safely break away in an emergency. But what sets the Squids® Glove Holder apart from the rest is its ability to be put back together and used again. Other similar products break when separated and need to be trashed. This innovative design allows the grabber’s two clips to be unhooked from each other and used independently.

Full body harness with D-ring center back only.

• 100% tie-off
• Twin free standing Y-retractables
• 8Ft web lanyards
• 3600Lb gate
• Large aluminum rebar hooks
• Small swiveling carabiner hook top