Fall Protection

Full body harness with D-ring center back only.

Small Carabiner, 3600 lb Gate, 1In Throat

• 100% tie-off
• Twin free standing Y-retractables
• 8Ft web lanyards
• 3600Lb gate
• Large aluminum rebar hooks
• Small swiveling carabiner hook top

The model# US-5000 is a rope grabbing device that follows a worker’s movement up and down a vertical lifeline. If a fall occurs, the rope grab locks on the rope and absorbs much of the force generated during the free fall. The unique energy absorbing design of the US-5000 allows the user to Use a standard rope or web lanyard and still meet OSHA’s maximum force requirements.

Model # US-5000 is to be used with 5/8? or 3/4? diameter 3- strand synthetic rope lifeline with minimum tensile strength of 5800 Ib. Polyester type is preferred.

Pillow-Flex, D-Ring Center Back, Each Hip Tongue Buckle Legs, Back Pad with Tool Belt Chest Quick Release and X-Pad.

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

Kevlar fire resistant harness

D-Ring Center Back, Quick Release Buckles with Padded Legs and X-Pad.

3/4” FALL PROTECTION CONCRETE ANCHOR’S ARE TO BE USED IN CONCRETE SUBSTRATE ONLY. DO NOT USE IN STEEL, WOOD OR ANY OTHER SUBSTRATE. THIS PRODUCT IS USED IN CONCRETE ONLY. ANCHOR’S CAN BE PLACED IN:

• Horizontal surfaces
• Vertical surfaces
• Overhead / ceiling surfaces

Workmaster’s harness, D-ring on center back and each hip, integrated tool belt, quick release buckles