Search in Category
Filter Your Search
Shop by Category
Fall Protection
3X-Large Positioning Harness, 3 D-Ring, Parachute Buckles
Full body harness, positioning type D-ring center back and on each hip.
Nylon Web Lanyard, 1In x 3Ft, Small Rebar Hooks & Shock Absorbing Pack
- Small rebar hooks on both ends
- Shock absorbing pack
Ultra-Tube Two Shock-Absorbing Y-Lanyard, 1In x 6Ft, Small Rebar Hook Top & 2 Large Rebar Hooks Bottom
- Anchorage: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 lbs. with certification of a qualified person or 5000 lbs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure.
- Plan your personal fall protection system. Before installing and using this equipment, consider all factors affecting your safety during use of this equipment.
- Warnings and instructions must be read and understood before using equipment.
- Equipment must be used by trained personnel only.
- Users must understand all OSHA regulations, ANSI standards, and other relevant regulations and standards pertaining to fall protection equipment.
3/4" CONCRETE ANCHOR CONNECTOR - WER A510000
The WERNER A510000 Reusable Concrete Anchor is a lightweight, easy to use bolt providing convenient anchorage in concrete. The anchor requires a pre-drilled hole of 3/4 inch and 3-1/2 inch minimum depth in 3000 psi concrete. It can be used in any direction as a fall protection anchor and is reusable with its easy to insert and remove design.
Features
- Lightweight design is easy to insert and remove
- Drill hole of 3/4 inch with 3-1/2 inch minimum depth
- Minimum 3000 psi concrete
- Multi-directional use
Small Carabiner, 3600 lb Gate, 1In Throat
Small Carabiner, 3600 lb Gate, 1In Throat
Large Carabiner, 3600 lb Gate, 2-1/4In Throat
Large Carabiner, 3600 lb Gate, 2-1/4In Throat
LifeLine Rope, Poly Blend, 5/8" x 50' - WER L201050
LifeLine Rope, Poly Blend, 5/8” x 50’
Medium-Large 3M™ Protecta® Vest-Style Positioning Harness, Black
3M™ Protecta® Vest-Style Positioning Harness with a fixed D-ring to minimize workday readjustment and a modern design that gives the harness a fresh, sleek look. Plus, Tongue-Buckle Leg Connection, Pass-Through Chest Connection, and Back and Side D-rings. Designed for added convenience, these updated harnesses are rated for 420 lbs (190 kg) total working weight.
Rope Grab for 5/8In Poly-Dac Rope, Stainless Steel
US-5000C Rope Grabs are made of durable non-corrosive stainless steel, brass & bronze.They 100% inspected for function, construction and material integrity and are designed to meet the performance requirements of ANSI Z359.1, OSHA 1926 (maximum 3 ft (0.9m) shock absorbing lanyard) and CSA Z259.2 (a permanently attached 3 ft (0.6m) lanyard) when used with Polysteel / Poly Pro Blend or be positioned not to exceed 6’ free fall. 5/8? (16mm) Rope and installed and maintained properly.
NOTE:This Rope Grab is intended to be used as part of a complete personal fall protection system. All other components subs stems and connectors used in conjunction or attached to this Rope Grab should be compatible and meet the appropriate OSHA /ANSI /CSA requirements for the intended application. Substandard or non-approved components could compromise the reliability of the system and jeopardize safety of the user.