Chain and Accessories

3/4In Anchor Shackle, Screw Pin, 4-3/4T, Blue, Forged Carbon Steel

5/8In Anchor Shackle, Screw Pin, 3-1/4T, Blue, Forged Carbon Steel

7/8In Anchor Shackle, Screw Pin, 6-1/2T, Blue, Forged Carbon Steel

1In Anchor Shackle, Screw Pin, 8-1/2T, Blue, Forged Carbon Steel

1/2In Anchor Shackle, Screw Pin, 2T, Blue, Forged Carbon Steel

Features

• To Tighten Chain, Typically for Cargo Securement
• Meets U.S. D.O.T. 393.100 -393.102 Requirements for Use with Chain
• Lever Type: Allows for Quicker Application of Load
• Ratchet Type: Allows for Easier Adjustment of Tension and Greater Range of Take-Up
• DO NOT EXCEED THE WORKING LOAD LIMIT
• Do Not Use for Overhead Lifting or Hoisting

Campbell® Binder Chain with Clevis Grab Hook, 3/8 in Trade, Load Capacity: 6600 lb, Grade: 70, Material Construction: Steel, Finish: Yellow Chromate Zinc Electroplated, 20 ft Length, Package Type: Drum

Features

• Chains may be used in accordance with the latest DOT regulations
• Grade 70 binder chains provide higher load to weight ratios
• Used to tie down or “bind” loads for transportation
• Made in USA

5/16In Grade 30 Proof Coil Chain, Zinc Plated, Per Foot

Features

• For use in load binding, towing and logging
• Can be used in accordance with Department of Transportation regulations
• Standard material: Heat-treated carbon steel
• Standard finish: Zinc electroplate and yellow chromate conversion coating
• Hallmarking: “C7” or “M7”
• Proof tested
• Do not use for overhead lifting
• Container style: Drum
• Priced per foot

Features

• Shackle Bodies Are Drop-Forged Carbon Steel
• Self Colored (Painted Blue)
• C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
• Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
• Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
• 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 ”Rigging Hardware”. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
• Certification Available Upon Request
• 6 to 1 Design Factor
• Pins and Bolts Are Heat-Treated and Made of Alloy Steel
• DO NOT EXCEED THE WORKING LOAD LIMIT