Bonded

• IRON WORKER™
• Aluminum oxide grain
• Fast cutting
• Excellent for use on angle iron, channel iron, heavy rebar, and other ferrous metals
• METAL Structural metal applications

• Aluminum oxide grain
• Soft bond for fast stock removal
• METAL Ferrous metals (iron, steel, welds, etc.)
• STAINLESS Low grade stainless steel

• A24R PIPELINE
• Aluminum oxide grain
• Designed and manufactured to perform both cutting and light grinding
• METAL Ferrous metals (steel, cast iron, etc.)

The Metabo® Original Slicer® 4 1/2-Inch x 0.45-Inch x 7/8-Inch, Type 27, A60TZ, is a high-quality cutting wheel that allows you to work on a variety of metal repair and fabrication tasks. The general-purpose aluminum oxide wheel has a cutting rate of 13,300 rpm, so you don’t waste time during cutting. The Metabo 4 1/2-inch x 0.045-inch x 7/8-inch A60TZ Original Slicer is flexible enough for flush cutting, so you can make close cuts when necessary for a more even surface. It sits flat and perpendicular to the mounting hole for easy attachment. The slicer features a burr-free design for smooth cutting, with no jagged edges.

Features

• The Metabo 4 1/2-inch x 0.045-inch x 7/8-inch A60TZ Original\u00A0Slicer is\u00A0a\u00A0high-quality cutting tool that allows work on metal and fabrication tasks
• Has a maximum speed of 13,300 rpm for fast cutting
• Has flush cutting flexibility for close cutting when metal is rough for a smooth, even surface
• This type 27 aluminum-oxide wheel mounts easily on compatible tools
• Burr-free design, so each cut is smooth and free of jagged edges.
• Warranty against defects\u00A0
• Made in USA

• A24R
• Aluminum oxide grain – our most popular wheel
• For general purpose grinding
• Longer life for fewer wheel changes
• METAL Ferrous metals (iron, steel, welds, etc.)

• A24R
• Aluminum oxide grain – our most popular wheel
• For general purpose grinding
• Longer life for fewer wheel changes
• METAL Ferrous metals (iron, steel, welds, etc.)

• High grain concentration for smooth, aggressive cutting
• 5/64 in. thin wheel design for fast, burr-free cuts
• Optimized design for FLEXVOLT® Cutoff Saw (DCS690), for long runtime and maximum productivity on the jobsite

• GENERAL PURPOSE
• A60S
• Special aluminum oxide grain
• Extremely fast burr-free cutting with long life
• Exceptional performance
• METAL Ferrous and/or non-ferrous metals
• (iron, steel, welds, etc)

Features

• Aluminum oxide general purpose wheel for heavier working conditions for steel and other ferrous metals.
• Very fast rate of cut
• Good wheel life.
• Flexibility for flush cutting.

• Special silicon carbide grain formula is excellent for grinding masonry,
• concrete, stone and aggregate
• Use the C24N wheel on hard to grind metal like cast iron and carbide
• Soft bond for fast stock removal
• CONCRETE Masonry, concrete, stone
• METAL Cast iron and other ferrous metals, carbide