Fuel

VENTED FUEL CAP FOR TRANSFER TANKS VENTED FUEL CAP FOR TRANSFER TANKS

Tuthill Fill-Rite Green Automatic Diesel Nozzle with Hook. 3/4” NPT Inlet, Viton Seals, 2.5-14.5 GPM (9.5-55 LPM), 50 PSI Working Pressure. The N-Series nozzles are well suited for a broad range of high flow fueling applications from farm tractors and combines, heavy earth-moving equipment, fleet re-fueling, to above ground storage tanks and portable truck mounted fueling operations. This rugged series of automatic nozzles will provide years of service with minimal down time and quick fueling.

Features

• Compatible with diesel
• UL Listed
• 3/4” diameter nozzle and a 3/4” NPT inlet for attaching to a fuel line
• Automatic shut-off
• Convenient one-finger hold-open clip to set flow rate
• Insulated hand grip to minimize hot and cold handling
• Large spout spring to hold nozzle in place
• Aluminum for resistance to corrosion and tarnishing
• Green body cover indicates gasoline diesel Kerosene compatibility and automatic shut-off for safety
• Viton seals for resistance to heat and chemicals
• Working pressure of 50 psi and Minimum temperature rating of -20 degrees F
• Made in USA

3.5-Gallon Funnel Top General Duty Profe

• Fill-Rite Model FR1211H is a 12-Volt 15 GPM fuel transfer pump that comes with a 3/4 in. x 12 ft. discharge hose, 3/4 in. manual nozzle, 807C mechanical 3-digit fuel transfer meter (gallons), 1 in. x 34 in. telescoping steel suction pipe, 3/4 in. elbow, 5 ft. 12-Gauge ground wire, and a 18 ft. 12-Gauge 2-wire battery cable. It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20.
• It is important to note that the previous FR1211G model has been updated to the FR1211H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

Features

• Flow Rate: 15 GPM
• Power Supply: 12V DC
• Fluids: Diesel & Gasoline
• Inlet: 1 Inch
• Outlet: 3/4 Inch
• Includes: 3/4” x 12’ Hose w/ Static Wire, 3/4” Manual Nozzle & 807C Mechanical Meter (Gallons)

DELTA 24“x24“x 24” 50G SQ TRANSFER TANK

12V DC, 20 GPM heavy duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, 1” ultra high flow automatic nozzle, 1” x 12” hose with static ground wire, 18’ battery cable with clamps, 20”-34” steel telescoping suction pipe, and 4-digit mechanical meter. UL/cUL, ATEX, CE motor. Two-year warranty. Made in USA.

Features

• 20 GPM (76 LPM)
• UL listed motor
• Heavy duty cast iron
• Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
• 2 year warranty
• 2 in. threaded base for tank mounting
• Heavy duty cast iron construction
• Cast bronze rotor with bronze rotary vanes
• Built-in strainer
• 1 in. x 12 ft. hose with static wire
• 901 mechanical meter
• Manual nozzle
• Replaces FR4211D

This quick, economical Hand Pump provides a clean, safe way to unload your 55 gallon drum. Producing 11oz per stroke is great for small shops or even as an emergency backup. Designed for hydraulic, engine, and gear oils, diesel, anti-freeze, mild acids, DEF, AdBlue, and de-greasers. Simple and easy to use, mounts directly to a 55gallon drum on the 2NPT Bung adapter, with 20-35” Polypropylene Telescoping Suction Tube.

Features

• Hand action lever
• 11 oz per stroke
• Polypropylene construction
• Telescoping suction tube
• 2 in. NPT bung adapter

3-wheel mechanical fuel transfer meter kit, 5 to 20 gpm. Aluminum construction. +/- 1% accuracy rating. Designed for gasoline, diesel, biodiesel up to B20, E15 and kerosene. Includes meter and fittings to mount on 3/4 in outlet fuel transfer pumps.

F1810HM0 18 GPM Fill-Rite™ Hydrosorb Spin-On Filter

Features

• Suited to handle contamination problems caused by dirt, silt and corrosion
• May be used with alcohol and alcohol fuel blends
• Pre-filtering keeps your fuel cleaner and helps your engines operate more efficiently

Tuthill Fill-Rite nozzles are well suited for a broad range of high flow fueling applications from farm tractors and combines, heavy earth-moving equipment, fleet re-fueling, to above ground storage tanks and portable truck mounted fueling operations. This rugged series of manual nozzles will provide years of service with minimal down time and quick fueling.

Features

• Compatible with gasoline and diesel
• UL/cUL listed
• 3/4 in aluminum nozzle
• 3/4 in NPT-F outlet
• Manual nozzle
• 50 PSI working pressure
• Integral hanging hook compatible with all Fill-Rite products
• Minimal spray pattern to reduce foaming and false shut-offs
• Viton seals and o-rings for smooth valve operation
• Rated to -20°F operation
• Made in USA