Signs and Lights

TAG,INSPECTION RECORD,25PK

A 360-degree LED warning light designed to use as a signaling or warning device for vehicle applications where a rubber base is preferred for vibration resistance. The polycarbonate lens is a friction fit-down into the hard rubber base. Includes a 15’ straight cord and cigarette lighter plug with a built in on/off switch.

Powered by REDLITHIUM® USB, the Milwaukee® USB rechargeable Rover™ pivoting flood light delivers best-in-class output in any direction. With 550 lm of TRUEVIEW™ high definition output, the light heads 210° of rotation directs high output light to any work surface. A wide, magnetic base makes the USB rechargeable pivoting flood light perfect for positioning on common work surfaces or mounting to metal for hands free task lighting. It’s collapsible design fits into pockets and a built-in carabiner gives user the ability to clip it to tool organizers or straps for easy transport from task-to-task. Optimize your light output or runtime by using one of three different output modes and get up-to 11 hours of runtime. Charge REDLITHIUM® USB batteries right inside the light via micro USB or swap it out with an additional REDLITHIUM® USB batteries for virtually no downtime. The Milwaukee USB rechargeable Rover™ pivoting flood light is great for any trade professional and is covered by a Limited Lifetime Warranty.

Features

• 550 lm of TRUEVIEW™ high definition output
• Light head pivots 210°
• Magnetic base with built-in carabiner
• Three light output modes: high mode: 550 lm to 2.0 hours; medium mode: 250 lm to 4.5 hours; low mode: 100 lm to 11.5 hours
• IP54 Rated: water and dust resistant
• Folds up compact for easy storage in a pocket
• Built-in carabiner clips to tool bags for transporting on and off site
• Charges REDLITHIUM™ USB battery internally with micro-USB cable from USB power source or AC outlet (wall plug not included)
• 3X faster charge time delivers 80% charge in under 1 hour (*Using 2.1A compatible wall plug)
• Fuel gauge allows fast checking of REDLITHIUM USB battery charge
• 2 ft. jobsite tough, braided micro-USB cable with metal ends
• Light and LED Limited Lifetime Warranty; 2 year warranty on REDLITHIUM USB battery

Features

• Stainless Steel Quick Disconnect Non-Powered Base.
• Our Quick Disconnect mounts are an extreme benefit for a super-fast install and removal of the whip for end users; whips can even be disconnected one handed which is extremely beneficial. Our Quick Disconnect adaptors are great for clients but most importantly our stocking distributors; as that enables any whip to be a Quick Disconnect Whip easily. We offer Quick Disconnect adaptors without the receiving base and Quick Disconnect Adaptor Kits with the adaptor and receiving base mount for use in converting any powered or non-powered ½? 20 thread whip connection to a Quick Disconnect Whip. Our Quick Disconnect mounts and accessories are so simple to operate as they utilize Snap type (ball latching) quick disconnects which are manufactured with a spring loaded ball latching mechanism which automatically locks the two halves of the fitting together when they are pushed together. When the releasing sleeve is pulled back, the interior end and exterior ends quickly unlock from each other. Since many whip users remove their whip several times a day to get on or off highway; this quick release component is beneficial for whip users who require frequent install and removal of the whip throughout the life cycle of the whip. These QDCs can handle pressure, jolts and jarring on a consistent basis as evidenced by the mining industry we started using SafetyWhips® in so many years ago.

107DB BACKUP ALARM 12-24B

This rechargeable all LED Work Light has both a spotlight and a floodlight built in. The spotlight, located in the base of the handle, is rated at 32 Lumens. It’s perfect for putting a narrow beam of light into a specific area. The floodlight, rated at 230 Lumens, is designed for lighting up a large area. The idea is simple, use the spotlight to find the problem, and the floodlight to light up the area when fixing the problem. The work light has two magnets built in…one at the balance point in the middle of the handle, and the other at the tip of the light. The flat-bottom design of the handle means the light will stand up on most flat surfaces, and the octagonal shape to the handle keeps the floodlight aimed in the correct direction when you lay the light on its side. Further adding to the work light’s hands-free features is the detachable magnetic hook. It can be attached to either integrated body magnet and rotated 360 degrees. The integrated Nickel Metal Hydride battery can be recharged with the included AC or DC power supply/charger.

Features

• Light has 60 LEDs rated at 230 lumens arranged in a floodlight pattern and 6 LEDs in the base of the handle rated at 32 lumens serving as a spotlight
• Two built-in magnets, one at the tip of the light and the other at the mid-point of the body for hands-free use
• Magnetic hook can be attached to either of the built-in magnets and can be rotated 360 degrees for even more hands-free versatility
• Octagonal body design keeps the light in place when laid on its side
• Flat bottom design allows the light to stand up
• Water resistant
• Impact & chemical resistant
• Powered by integrated Nickel Metal Hydride (NiMH) battery
• Includes both AC & DC power supply/charger

EXPANDABLE TASK LIGHT

120 LUMEN HEAD LIGHT

REFILL FOR 14755 AIR HORN

This fluorescent work light uses a single 13 watt fluorescent bulb. The amount of light produced is similar to that of a 75 watt incandescent bulb but with a daylight color to it. The work light is turned on/off by a single sealed push button switch and has a 25 foot 18/2 SJT cord.

Features

• Cool running 13 watt fluorescent bulb
• Similar amount of light to a 75 watt incandescent bulb but with a daylight color (6500 Kelvin)
• Nylon tip double hooks for hands-free use
• Ballast enclosed near plug end of cord